Bosch MMB66 Series, Instruction Manual

Page: 16 / 206

16
Contents
en
Safety systems
Start lock-out
The appliance cannot be switched on until
the blender jug has been turned irmly into
place.
Automatic disconnection
The appliance switches o automatically
if the blender jug accidentally becomes
detached during operation.
Overload protection
If the motor switches itself o while the
appliance is being used, the overload pro-
tection feature has been activated. Possible
causes:
–
very large amounts of ingredients,
–
appliance operated too long.
If a safety system is activated, see
“Troubleshooting”.
Overview
These operating instructions refer to various
models. Please fold out the illustrated pages.
Fig. A
1 Motor block
2 Rotary switch with illuminated ring
The illuminated ring lashes slowly when
the appliance is ready for use (
on
). The
illuminated ring is lit continuously when
the appliance is in operation. Rapid
lashing signals a fault (see “Trouble-
shooting”).
P
Stop
on
Appliance on
min
Lowest speed
max
Highest speed
Q
Pulse circuit at maximum
speed. Hold down switch for
required duration.
3 Quick-selection buttons
Preset buttons for optimum results.
T
for crushing ice cubes (crushed
ice). Press button 1x briely.
U
*
For making mixed drinks
and smoothies. Press button
1x briely.
For an even more delicate
result, press the button a
second time.
V
*
For cutting ingredients in the
universal cutter. Press button
1x briely.
Pay attention to
Figure G
in
the table!
High
Speed
For making mixed drinks and
smoothies. Press button 1x
briely. The appliance runs
with a speed that is up to three
times higher.
When a quick selection button
(
T
/
U
/
V
/
High Speed
) has been
pressed, the preset programme runs.
To end the programme early, press any
quick-selection button or turn the rotary
switch to 0/o .
Congratulations on the purchase of
your new Bosch appliance. You can ind
further information about our products
on our web page.
Contents
Intended use .............................................14
Important safety information .....................14
Safety systems .........................................16
Overview...................................................16
Operation ..................................................17
Cleaning and servicing .............................20
Troubleshooting ........................................20
Recipes.....................................................21
Disposal ....................................................23
Guarantee.................................................23