Bosch MMB21 series, Instruction Manual, Page: 16 / 186

16
Cleaning and servicing
en
After using the appliance
Set the rotary switch to
P
.
Remove mains plug.
Remove the blender jug by rotating it in
an anti-clockwise direction.
Take the lid off the blender jug.
Empty blender jug.
Turn blender jug over and put down with
the opening face down.
Remove blade holder. To do this, fold the
handle upwards and pull out the blade
holder.
Clean all parts, see “Cleaning and
servicing”.
Working with the smoothie insert
With this insert it is particularly easy to make
smoothies made of fresh fruits, milk, soya
milk, yoghurt and juices.
Fig.
D
Prepare blender as described above.
After attaching and screwing on the
blender jug, the smoothie insert is
inserted into the blender jug.
Put lid on and press down all the way.
Insert the mains plug.
Put ingredients through the feed tube into
the blender jug; chop up fruit beforehand
if required.
Warning!
Do not put large, hard ingredients in the
blender jug, e.g. stones from avocados or
plums.
Insert measuring cup into feed tube.
Switch on the appliance.
After using the appliance
Set the rotary switch to
P
.
Remove mains plug.
Remove the blender jug by rotating it in
an anti-clockwise direction.
Remove lid.
Take measuring cup out of the lid and
plug into the smoothie insert. This
prevents integral components from falling
out of the insert into the drink.
Empty blender jug.
Clean all parts, see “Cleaning and
servicing”.
Cleaning and servicing
The appliance requires no maintenance!
Thorough cleaning guarantees a long
service life. An overview of cleaning the indi-
vidual parts can be found in
Fig. E
.
W
Risk of electric shock!
Never immerse the motor block in water and
never hold under running water and do not
clean in the dishwasher.
Warning!
Do not use abrasive cleaning agents.
Surfaces may be damaged.
Tips:
–
Preferably clean the parts immediately
after use. This will prevent residue from
drying on and attacking the plastic
(e.g. by essential oils in herbs).
–
If processing e.g. carrots and red
cabbage, the plastic parts will become
discoloured by a red ilm which can be
removed with a few drops of cooking oil.
Cleaning the motor block
Remove mains plug.
Wipe motor block with a damp cloth.
If required, use a little detergent.
Then wipe dry.
Cleaning the blender
The blender jug, lid and measuring cup are
dishwasher-safe.
Tip:
Pour a little water and washing-up liquid
into the attached blender. Switch to setting
Q
for several seconds. Pour out the
water and rinse the blender with clean water.
Cleaning blade holder
(only MMB42...)
W
Risk of injury from sharp blades!
Do not touch blender blades with bare
hands. Clean them with a brush.
Do not clean blade holder in the dishwasher,
but under running water using a brush. Do
not leave in water! Remove seal for cleaning.