Bosch MMB21 series, Instruction Manual, Page: 15 / 186

15
Operation
en
Recommended operating speed
Hot or frothing liquids
1
Making mayonnaise
2
Soups, Smoothies
2
Cocktails, Milkshakes
2
Ice cubes
Q
Very hard ingredients
Q
Preparation
Before operating the appliance and
accessories for the irst time, clean
thoroughly; see “Cleaning and servicing”.
Place motor block on smooth, stable and
clean base.
Unwind the cable to the required length.
Working with the plastic blender
jug (MMB21...)
Fig. B
Attach blender jug to the drive on the
motor block. Arrow on the blender jug
points towards the dot on the motor
block.
Attach blender blender jug by turning it
all the way
clockwise
.
Add ingredients.
Put lid on and press down all the way.
Insert measuring cup into feed tube.
Insert the mains plug.
Turn rotary switch to the required oper-
ating speed.
Grip the edge of the lid while operating
the blender. Do not grip the feed tube!
Add more ingredients
Set the rotary switch to
P
.
Either
Remove lid.
Add more ingredients.
or
Take out measuring cup.
Add liquids and solid (fairly small) ingre-
dients through the feed tube in the lid.
Switch on appliance again.
After using the appliance
Set the rotary switch to
P
.
Remove mains plug.
Remove the blender by rotating it in an
anti-clockwise direction.
Take the lid off the blender jug.
Empty blender jug.
Clean all parts, see “Cleaning and
servicing”.
Working with the glass blender
jug (MMB42...)
Fig. C
Put blender jug down with the base face
up.
Place seal on the blade holder. Ensure
that the seal is positioned correctly.
Important information
If the seal is damaged or not correctly posi-
tioned, liquid may run out.
Grip blade holder by the handle and
insert into the blender jug.
Note shape of the parts
(Fig. C -2a)
!
Move handle
(Fig.
C
-2b)
. This locks the
blade holder in the blender jug.
Turn blender jug over.
Attach blender jug to the drive on the
motor block. Arrow on the blender jug
points towards the dot on the motor block.
Attach blender blender jug by turning it
all the way
clockwise
.
Add ingredients.
Put lid on and press down all the way.
Insert measuring cup into feed tube.
Insert the mains plug.
Turn rotary switch to the required oper-
ating speed.
Grip the edge of the lid while operating
the blender. Do not grip the feed tube!
Add more ingredients
Set the rotary switch to
P
.
Either
Remove lid.
Add more ingredients.
or
Take out measuring cup.
Add liquids and solid (fairly small) ingre-
dients through the feed tube in the lid.
Switch on appliance again.