26
en | (Optional) Configuration Programming on a Temporary Table-top Stand
MIC IP ultra 7100i
│
MIC IP starlight 7100i
2019-07-03 | 0.17 |
Installation Manual
Bosch Security Systems
8
(Optional) Configuration Programming on a Temporary
Table-top Stand
!
Caution!
Take extra care lifting or moving MIC cameras because of their weight.
The camera (still in the foam) can stand temporarily on a flat, horizontal surface such as a
desk or a table during initial network connection and configuration.
1. Remove the packing material to access the camera’s electrical connectors.
2. Remove the foam covering the head of the camera.
3. Remove the camera, still in the foam, from the box. Place the camera upright on a flat,
horizontal surface.
4. Supply power to the camera and Connect the Camera to the Network, page 43. Note that
the wiper moves one to three times across the camera window, and then returns to parked
position.
5. Configure the camera. Refer to the separate User Manual for details.
Notice!
If you change the camera orientation to “
Inverted
” (from the page
Configuration
of the web
browser:
Camera
>
Installer Menu
>
Orientation
), then the camera head will rotate
automatically into inverted position (180°). Note that the visor will now be near the body of
the camera.
6. Disconnect the wires/cables from the connectors in the base of the camera.
Summary of Contents for MIC IP ultra 7100i
Page 1: ...MIC IP ultra 7100i MIC IP starlight 7100i MIC 7504 MIC 7522 en Installation Manual ...
Page 2: ......
Page 55: ......
