“High Shock Event” appears in
English in the middle of the OSD until
the camera is reset.
The camera experienced a high shock event.
–
Check the integrity of the mechanical parts and
the screws (especially on the yoke arms).
–
If there is obvious and severe damage, stop using
the camera and contact your Bosch Service
Center for assistance.
–
If no damage is evident, complete one of the
following steps:
a) Cycle the power on the camera.
b) Send command AUX OFF 65 to remove the
OSD message.
–
If IVA is configured on your camera, the OSD
message may interfere with IVA operation.
32
en | Troubleshooting
MIC IP starlight 7000 HD, MIC IP
dynamic 7000 HD
2015.12 | 3.0 | F.01U.291.520
Installation Manual
Bosch Security Systems
Summary of Contents for MIC-71xx
Page 1: ...MIC IP starlight 7000 HD MIC IP dynamic 7000 HD MIC 71xx MIC 72xx en Installation Manual ...
Page 2: ......
Page 35: ......
