1 699 200 878
2020-04-21
|
Bosch Automotive Service Solutions, Inc.
Quick Start Guide | Mastertech II VCI | 3
en
3. Connect VCI to the
Vehicle
Fig. 2:
View right side with OBD and 2x USB Type A
!
Only use Mastertech II VCI in combination
with original and approved hardware and
software.
Use of Mastertech II VCI and record-
ing of diagnostic data while driving
may only be carried out by trained
and instructed employees of the ser-
vice workshop.
WARNING - Risk of accident when
used while driving
Impairment of driving safety and braking
effect by connecting cables in the
driver's area and distraction when using
while driving. Death or serious injury.
a
Place, lay and secure
Mastertech II VCI and all connect-
ing cables in such a way that there
is no impairment of driving safety
and braking effect.
a
Use of Mastertech II VCI and
recording of diagnostic data while
driving may only be carried out by
trained and instructed employees
of the service workshop.
a
Mastertech II VCI must be operated
by a second person (not driver)
while driving.
a
During the data recording always
observe the legal requirements for
road traffic.
1.
Connect the Mastertech II VCI (fig. 1 item 1)
to the OBD connection of the vehicle using
the OBD connecting cable (fig. 1 item 2).
2.
Start the diagnosis software.
3.
Follow the software instructions.
4. Using Wireless
Communication
If you are using the kit with WLAN then you can
communicate with the vehicle without using the
USB connecting cable. To configure the WLAN
connection Mastertech II VCI – computer, please
see chapter "WLAN" in the operating instructions
of Mastertech II VCI.
5. Information on Data
Protection
!
The data processing performed by this device
may be protected by regional data protection
regulations. Processed categories of data are
vehicle master data (data generated in the
vehicle during manufacturing like the vehicle
identification number VIN), and vehicle event
data (data generated by the vehicle after
manufacturing). The processing purpose is
control unit diagnosis.
