4 | Technical Data
8 / 104
Modular Sensor Interface M 60
Bosch Motorsport
4 Technical Data
The M 60 is a compact and light weight sensor interface unit for analog and digital
sensors. Up to eight M 60 can be used to expand the number of input channels of the
data logger C 60 as well as the display DDU 9. The M 60 are linked via high-speed Ether-
net interface. This allows for synchronized acquisition of data from the different units and
the ECU.
The M 60 offers 26 analog inputs, four rotational inputs, four pwm outputs and two inde-
pendent CAN buses. Each analog input channel features an analog pre-filter, 8 x over-
sampling and highly linear digital filtering. The cut-off frequency of the digital filter is
automatically adjusted to match the acquisition rate. The latency of the digital filters is
corrected during recording, yielding zero filter delay in the recorded data.
The evaluation of each M 60 measurement channel is individually configurable with the
PC configuration tool RaceCon.
Application
8 kHz AD converters with digital low pass filter
Configurable math channels
User configurable CAN in/out messages
Up to 1,000 Hz acquisition rate for all channels
3-port network switch
Mechanical Data
Size
105 x 34.5 x 137.5 (149) mm
Weight
495 g
Operating temperature internal
-20 to 65°C
Max. vibration
Vibration Profile 1 (See Appendix or
www.bosch-motorsport.com)
Electrical Data
Supply voltage
8 to 18 V
Max. power consumption (w/o loads)
10 W at 14 V