10 | Analog and Frequency Inputs
68 / 104
Modular Sensor Interface M 60
Bosch Motorsport
Configuring a PWM Output
1.
Click on ‘Measurement Sources’ in the Toolbox.
2.
Drag the ‘PWM Out’ computed source from the Toolbox and drop it on the desired
‘PWM_OUT’ channel in the M 60 Project Tree.
A ‘PWM Out Wizard’ opens.
Working with automatically created measurement sheets is explained in chapter Set-
ting up an online Measurement.
Choosing a filtered channel as an input for ‘PWM_OUT’ will cause delayed reaction
due to the delay introduced by the digital filter. Use unfiltered values for this purpose.
The ‘power-on’ state of the PWM output is ‘switch open’ (0% duty cycle).
3.
Click ‘Finish’ when done.
4.
Enter channel name and description.