LTC 8561 |
Instruction Manual
|
Summary of PIN Assignments
EN
| 17
Bosch Security Systems | January 19, 2006
7.3.1
J105 - Lens Output
Pin No.
Signal Name
Remarks
1
Zoom
Connect to lens zoom motor wire.
2
Focus
Connect to lens focus motor wire.
3
Iris
Connect to lens iris motor wire.
4
Common
Connect to lens motor common
wire.
7.4
Pre-position
Pre-positions: 82 with 5 functions each (when using
continuous pan motor) or 99 with 4 functions each.
Five conductor terminal block, J111, and four
conductor terminal block, J106, are found on left side
of the top main printed circuit board. Pin one is to the
left side of the connectors.
7.4.1
J111 - P&T Position Sense
Pin No.
Signal Name
Remarks
1
+
Connect to P/T motor pre-position
sensor power.
2
PAN1
Connect to first P/T motor pan
pre-position sense.
3
PAN2
Connect to second P/T motor pan
pre-position sense.
4
TILT
Connect to P/T motor tilt
pre-position sense.
5
–
Connect to P/T motor pre-position
sensor ground.
7.4.2
J106 - Lens Position Sense
Pin No.
Signal Name
Remarks
1
+
Connect to lens motor pre-position
sensor power.
2
ZOOM
Connect to lens motor zoom pre-
position sense.
3
FOCUS
Connect to lens motor focus pre-
position sense.
4
–
Connect to lens motor pre-position
sensor ground.
7.5
Pan/Tilt
Pan/Tilt Output: 4 function for pan/tilt solid state
drive with zero crossing turn-on; 1 A drive capability.
Auto-pan/Auxiliary Output 1: Solid state drive with
zero crossing turn-on; 1 A drive capability.
Six conductor terminal block, J406, and two conductor
terminal block, J401, are found near the left hand side
of the lower printed circuit board. Pin one is to the left
side of connector.
7.5.1
J406 - P&T Output
Pin No.
Signal Name
Remarks
1
RIGHT
Connect to pan right control wire.
2
LEFT
Connect to pan left control wire.
3
UP
Connect to tilt up control wire.
4
DOWN
Connect to tilt down control wire.
5
AUTO-PAN
Connect to auto-pan control wire.
6
FIELD
No Connection.
7.5.2
J401 - P&T Common
Pin No.
Signal Name
Remarks
1
RETURN
Connect to pan/tilt motor return
wire.
2
RETURN
Connect to pan/tilt motor return
wire.
7.6
Auxiliary AC Supply Output
NOTE: For the LTC 8566/60 and LTC 8566/50, the
maximum total current output, including Pan/Tilt
Output, Auxiliary 1 Output, and Auxiliary Supply
Output, is 2 A.
Auxiliary AC Supply Output: Fuse-protected auxiliary
AC supply. See Power under DESCRIPTION.
Two conductor terminal block, J402, is found in the
middle of the lower printed circuit board. Pin one is to
the left side of the connectors.
7.6.1
J402 - Auxiliary AC Supply
Pin No.
Signal Name
Remarks
1
SUPPLY
Auxiliary AC supply terminal.
2
RETURN
Auxiliary AC return terminal.
7.7
Auxiliary
Auxiliary Output 2, 3, and 4: relay contact rating 250
VAC, 5 A resistive, 0.25 hp.
Three conductor terminal blocks, J405, J407, and J408
are found on the right hand side of the lower printed
circuit board. Pin one is at the left side of the
connectors.
7.7.1
J405, J407, J408 - Auxiliary Relays
Pin No.
Signal Name
Remarks
1
NO
Normally open contact.
2
COMMON
Common contact.
3
NC
Normally closed contact.
