en
Installation
16
5
Installation
Installat
ion
Sliding the appliance up into place
1.
Slide the appliance up into place and make sure it is
positioned correctly.
¨
2.
Measure the distance between the appliance and
the wall, and mark this on the filler strip.
3.
If required, shorten the filler strip to the required
dimension.
©
Sliding out the appliance
Note:
Before you remove the appliance, protect the hob
with a piece of polystyrene from the packaging.
1.
Use a flat-blade screwdriver to push in the fastening
bolt, and turn it 90° until it locks into place.
¨
2.
Push in the fastening bolt gently with your fingers,
and turn it until it comes out of the housing along
with the spring.
©
Pull gently on the fastening bolt; before you do this,
take hold of the appliance from beneath with the
other hand.
ª
3.
Carefully remove the appliance.
$
%
&
Summary of Contents for LI67SA560B
Page 19: ...6 ...
