1 689 989 001
2012-03-16
|
Robert Bosch GmbH
�� | KTS ��� | Operation
en
6. Maintenance
!
The KTS 200 may not be opened. Opening the KTS 200
erases its licensing data. It is then no longer possible
to perform control unit diagnosis.
6.1
Cleaning
The housing and the display on the KTS 200 may only
be cleaned with soft cloths and with neutral cleaning
agents. Do not use any abrasive cleaning agent or rough
cleaning cloths.
6.�
Spare and wearing parts
Description
Order number
System tester KTS 200 (green)
1 687 023 279
System tester KTS 200 (blue)
1 687 023 428
System tester KTS 200 (gray)
1 687 023 429
Power pack
Power supply lead
<)
Power supply lead for USA, Canada
<)
1 687 023 620
1 684 461 106
1 684 461 116
USB connecting lead, 1 m
<)
1 684 465 491
OBD diagnostic lead, 1.5 m
<)
1 684 465 555
Wall bracket
1 681 320 082
<)
Wearing parts
"
Following successful completion of downloading, the
"Online updates" dialog window displays the message
"KTS" software update has been downloaded. Do you
now wish to install the "KTS" software update?
Installing KTS ��� software update
!
During software update, the USB link and the power
supply to the KTS 200 are not to be interrupted.Per-
form the following work steps in the order indicated:
1.
Select <
Yes
>.
2.
ESI[tronic] Startcenter start screen: Select "
KTS ���
>> Device information
".
3.
Select update in the
Available updates
box.
i
If no "Available update" is displayed, the KTS 200
already has the latest software and need not therefo-
re be updated.
4.
Select <
Update
>.
"
The KTS software update is installed.
i
If the KTS software update was cancelled (e. g. dis-
connection of USB link) or not installed in full, reco-
very can be performed with the ESI[tronic] Startcen-
ter: "
Help >> Service >> Restore KTS software
".
5.6
Faults
!
The KTS 200 may not be opened. Opening the
KTS 200 erases its licensing data. It is then no
longer possible to perform control unit diagnosis.
No communication with the control unit
The fault message “
No system found
” appears during
control unit diagnosis.
Possible causes
What can you do?
Incorrect lead connec-
ted.
Check whether the correct lead has be-
en used.
Incorrect pin selected
in pin selection menu
Under “Start >> Diagnostic socket”,
check which pin has to be used.
i
If problems of a different nature occur, please
contact the ESI[tronic] service hotline directly.
Summary of Contents for KTS 200
Page 2: ......
