Troubleshooting
en
41
Fault
Cause and troubleshooting
The water dispenser is
not functioning.
▶
Turn off the water supply and straighten the kink in
water hose.
If necessary, replace the water hose.
Ice cube production is
low.
The appliance has only recently been connected.
▶
Wait approximately four hours until the first batch of
ice cubes is ready.
The freezer compartment has been opened frequently
or for an extended period of time.
▶
Check ice cube production after a few hours.
Low water pressure.
▶
Check the water pressure of the water supply sys-
tem or the external water filter system, e.g. reverse
osmosis system.
Connect the appliance only to a water connection
with sufficient water pressure. →
The water filter is blocked.
▶
Food or objects are blocking the fill level sensor for
the ice cube maker.
▶
Remove all food and objects from the ice storage
container.
The ice cube maker is
not functioning.
Ice cube production is switched off.
▶
Switch on ice cube production. →
There is no water supply.
▶
Ensure that there is a water supply and that the
corner valve on the water connection is open.
Contact an installer if necessary.
Kink in the water hose.
▶
Turn off the water supply and straighten the kink in
water hose.
If necessary, replace the water hose.
Fault in the ice cube maker.
▶
Call customer service.
The customer service number can be found in the
enclosed customer service directory.
