Preventing material damage
en
9
Preventing material damage
2 Preventing material
damage
Preventing material damage
ATTENTION!
The high weight of the appliance may
damage the floor when it is moved.
▶
Use a trolley and floor protection
when moving the appliance.
When the appliance door is closed,
an open door pillar may damage the
appliance.
▶
Never open the door pillar manu-
ally.
▶
If the door pillar has been opened,
close it before closing the appli-
ance door.
Using the base, runners or appliance
doors as a seat surface or climbing
surface may damage the appliance.
▶
Do not stand or support yourself
on the base, runners or doors.
If the water pressure is too high or
too low, the appliance may not be
able to operate properly.
▶
Make sure that the water pressure
in the water supply system is at
least 200 kPa (2 bar) and max.
800 kPa (8 bar).
▶
If the water pressure exceeds the
maximum value specified, a pres-
sure-reducing valve must be in-
stalled between the drinking water
connection and the hose set of the
appliance.
Modified or damaged water hoses
may result in material damage and
damage to the appliance.
▶
Never kink, crush, modify or cut
through water hoses.
▶
Only use the water hoses supplied
with the appliance or genuine
spare hoses.
▶
Never re-use water hoses that
have been used before.
▶
Never pull on the water hose on
the rear panel of the appliance.
Contamination with oil or fat may
cause plastic parts and door seals to
become porous.
▶
Keep plastic parts and door seals
free of oil and grease.
Metal or metal-style parts in the appli-
ance may contain aluminium. Alu-
minium reacts when it comes into
contact with acidic foods.
▶
Do not store unpackaged food in
the appliance.
Environmental protection and saving energy
3 Environmental protec-
tion and saving energy
Environmental protection and saving energy
3.1 Disposing of packaging
The packaging materials are environ-
mentally compatible and can be re-
cycled.
▶
Sort the individual components by
type and dispose of them separ-
ately.
3.2 Saving energy
If you follow these instructions, your
appliance will use less power.
Selecting the installation location
¡
Keep the appliance out of direct
sunlight.
¡
Install the appliance as far away as
possible from heating elements,
cookers and other heat sources:
– Maintain a 30 mm clearance to
electric or gas cookers.
– Maintain a 300 mm clearance to
oil or solid-fuel cookers.
¡
Never cover or block the exterior
ventilation grilles.
Saving energy during use
Note:
The arrangement of the fittings
does not affect the energy consump-
tion of the appliance.
