Water system
en
31
Dispensing water
▶
Press and hold the glass against
the dispensing button or hold
the glass under the water dis-
penser and press .
Notes
¡
After a while of continuous dis-
pensing, the water stops being
dispensed. Wait a few seconds
before dispensing water again.
¡
After water has been dispensed
several times consecutively, wa-
ter stops being dispensed. Wait
a few minutes before dispensing
water again.
14.3 Ice cube maker
Use the ice cube maker to produce
ice cubes.
WARNING
Risk of injury!
Rotating parts may cause injury.
▶
Never reach into or underneath the
ice cube maker.
Note:
The ice cube maker automatic-
ally detects that the ice storage con-
tainer is full.
It could take up to 48 hours until the
ice storage container is full.
Tips
¡
You can accelerate ice cube pro-
duction by setting a colder freezer
compartment temperature or by
switching on Super freezing. This
will slightly increase energy con-
sumption.
¡
If the ice cubes taste stale, discard
the rest and the cubes ice pro-
duced over the next 24 hours. If
the ice cubes still taste stale,
change the water filter.
Putting the ice cube maker into
operation
Notes
¡
Ice cube production starts as soon
as the appliance is switched on
and the freezer compartment has
reached the set temperature.
¡
The first batch of ice cubes will be
ready after approximately 4 hours.
▶
For hygiene reasons, discard the
ice cubes produced within the first
24 hours.
Switching on ice cube production
▶
Lift the ice cube maker cover up-
wards and press the ice cube
maker button .
1
2
a
The ice cube maker button lights
up.
Note:
If you press and hold the ice
cube maker button for three
seconds, the filter change status is
reset.
