IntuiKey Keyboard
| en
39
Bosch Security System, Inc.
User Manual
F.01U.127.291 | 1.93 | 2009.03
–
Show Shot
Press Keypad Shot, and the status display changes for input as shown in
Figure B.5
.
Figure B.5
Allegiant Show Shot Status Display
Entering a two digit shot number followed by ENTER selects a previously programmed camera
position for the currently controlled camera.
Figure B.6
Allegiant Remove Scene Status Display
–
Preset Scene Control
This command is specific to G3 AutoDome cameras; pressing this key displays a camera
on-screen display.
–
Remove Scene from Tour
Press Clear Shot, and the status display changes to the display shown in Figure B-6.
–
Not Used
–
Aux Off
Press this softkey to enter a number associated with an auxiliary command. The status
display changes to an entry box. See the individual device control section for details of
the Camera Functions menu.
Allegiant
Show Shot
----
i
NOTICE!
This function is also accomplished by pressing the SHOT button (located next to the
joystick) and holding it down for more than 1 second.
Allegiant
Remove Scene
--
i
NOTICE!
If ENTER is held down, the Aux command auto-repeats until the key is released.
Summary of Contents for IntuiKey Series
