Bosch IntuiKey Series, User Manual

Page: 33 / 50

IntuiKey Keyboard Controlling System4 Video Multiplexers | en 29
Bosch Security System, Inc. User Manual F.01U.127.291 | 1.93 | 2009.03
Select Cameo Segment
When in Multi or Quad Mode, the screen area where a camera is displayed is called a cameo.
Press the Cameo softkey to enter the cameo selection mode. In this mode, joystick is used to
select which cameo window will be under control of the keyboard. Entering a number into the
keyboard while in this mode will cause the camera to appear in the currently selected cameo
window. Cameras may be assigned to any selected cameo, and may be changed as often as
required. The Intuikey’s numeric entry field title will change to Cameo while the DVR is in this
Mode. Press the Cameo softkey again to exit the mode.
Sequence
Runs a previously programmed camera sequence.
Toggle VCR Test Mode
Enables/disables the multiplexer’s VCR test mode. When in VCR test mode, the IntuiKey
status display shows the VCR icon.
Record
Activates VCR record mode and displays the REC indicator in the IntuiKey status display.
Press the softkey again to disable the record mode.
Play
Activates VCR play mode and displays the PLAY indicator in the IntuiKey status display. Press
the softkey again to disable the play mode.
Zoom
Enlarges the active camera display. Selection of any other camera displays that camera in full
screen enlarged mode. Press the Zoom softkey to show the following submenu for control of
the zoom function.
Figure 4.3 MUX Zoom Menu
Different levels of the zoom function (e.g. x2, x4) may be available depending on the
multiplexer model.
Freeze
Holds the selected camera picture on either full screen or cameo. The currently selected
camera image freezes, and FREEZE is displayed on the monitor screen. Press FREEZE again to
release the freeze mode. Freeze a different camera image by selecting another camera with
the camera keys and pressing FREEZE again. Changing the display screen mode releases the
freeze mode from all cameos.
i
NOTICE! The multiplexer function of Assigning All Cameras is provided by an additional
softkey on the MUX Main Control menu. Press this key to activate this function.
Exit
^ Up
Right > < Left
v Down
Zoom