en
Appliance door
32
8.
If necessary, you can remove the condensate
trough for cleaning.
‒
Open the appliance door.
‒
Tilt the condensate trough upwards and remove
it.
9.
WARNING ‒ Risk of injury!
Scratched glass in the appliance door may develop
into a crack.
▶
Do not use any harsh or abrasive cleaners or
sharp metal scrapers to clean the glass on the
oven door, as they may scratch the surface.
Clean the removed door panes on both sides with
glass cleaner and a soft cloth.
10.
Clean the condensate trough with a cloth and hot
soapy water.
11.
Clean the appliance door.
12.
Dry the door panes and refit them.
21.4 Fitting the door panes
WARNING ‒ Risk of injury!
The hinges on the appliance door move when the door
is opened and closed, which could trap your fingers.
▶
Keep your hands away from the hinges.
Components inside the appliance door may have sharp
edges.
▶
Wear protective gloves.
1.
Open the appliance door fully.
2.
Place the condensate trough vertically into the
retainer and turn it downwards.
3.
Slide the intermediate pane into the left- and right-
hand retainers .
4.
Push the intermediate pane upwards until it is in the
left- and right-hand retainers .
5. Note:
When sliding the pane in, ensure that the
glossy side of the pane is on the outside and the
cut-outs on the left and right are at the top.
Slide the inner pane into the left- and right-hand
retainers .
6.
Push the inner pane upwards until it is in the left-
and right-hand retainers .
7.
Put the door cover into position and push down
on it until you hear it click into place.
Summary of Contents for HSG936A 1 Series
Page 55: ......
