Bosch HSG936A 1 Series, User Manual And Installation Instructions

Page: 19 / 56

Steam
en
19
‒
If required, you can select other settings and re-
start the operation.
‒
When the food is ready, use ​⁠ to switch the ap-
pliance off.
12.
Empty the water tank and dry the cooking compart-
ment.
→
"After using steam operation", Page 20
Changing the type of heating
When you change the type of heating, the other set-
tings are also reset.
1.
Press ​⁠.
2. Press ​⁠.
3.
Press the type of heating that you want to use.
4. Reset the operation and use ​⁠ to start.
Changing the temperature
Once the operation has started, you can change the
temperature at any time.
1.
Press ​⁠ on the display.
2.
Press the temperature.
3.
Change the temperature with the setting ring.
4.
To confirm the change, press ​⁠ on the display.
a The change is applied.
Changing the cooking time
You can change the cooking time at any time.
1.
Press ​⁠ on the display.
2.
Press the cooking time ​⁠.
3.
Use the setting ring to change the cooking time.
4.
To confirm the change, press ​⁠ on the display.
a
The change is applied.
11.4 Setting added steam
Requirements
¡
Observe the information about the respective operat-
ing mode.
→
"Setting options with steam", Page 17
¡
The water tank has been filled. If the water tank runs
dry during operation, a message appears on the dis-
play. The appliance continues to operate but without
injecting steam into the cooking compartment.
→
"Filling the water tank", Page 17
1.
Press the operating mode that you require in the
menu.
2.
Select the settings for the operating mode, e.g. type
of heating and temperature.
3.
Press ​⁠ "Added steam".
4.
Use the setting ring to set the steam level.
Steam level Added steam
1 Low
2 Medium
3 High
5.
To confirm the set steam level, press ​⁠ on the dis-
play.
6.
Press ​⁠ to start the operation.
a
The appliance starts heating.
a
The setting values and how long the appliance has
already been in operation are shown on the display.
7.
When the food is ready, use ​⁠ to switch the appli-
ance off.
8.
Empty the water tank and dry the cooking compart-
ment.
→
"After using steam operation", Page 20
Changing added steam
You can change or deactivate the added steam func-
tion at any time.
1.
Press ​⁠ on the display.
2. Press added steam ​⁠.
3.
Change or deactivate added steam using the setting
ring.
4.
To confirm the change, press ​⁠ on the display.
a The change is applied.
11.5 Setting the steam jet function
Requirements
¡
Observe the information about the respective operat-
ing mode.
→
"Setting options with steam", Page 17
¡
The water tank has been filled. If the water tank runs
dry during operation, a message appears on the dis-
play. Operation is stopped.
→
"Filling the water tank", Page 17
1. Press the operating mode that you require in the
menu.
2. Select the settings for the operating mode, e.g. type
of heating and temperature.
3. Press ​⁠ to start the operation.
4.
Press ​⁠ on the display at the desired time.
Do not use the steam jet until the appliance has
completely heated up.
5. Press ​⁠ "Steam jet".
a
The ​⁠ symbol lights up red and the appliance heats
up the water.
6.
When the water is heated up, press ​⁠ "Steam jet"
again.
Note:
If rapid heating ​⁠ is activated, the steam jet
can only be triggered once rapid heating is com-
plete.
a The steam jet is triggered and the appliance adds
clouds of steam to the cooking compartment for ap-
prox. 3 to 5 minutes.
a
When the steam jet has finished, the operation con-
tinues to run as normal. Depending on the opera-
tion, the steam jet can be triggered again if neces-
sary.
7.
When the food is ready, use ​⁠ to switch the appli-
ance off.
8.
Empty the water tank and dry the cooking compart-
ment.
→
"After using steam operation", Page 20
Cancelling the steam jet
You can cancel the steam jet at any time.
1.
Press ​⁠ on the display.
2.
Press ​⁠"Steam jet".
a
The ​⁠ symbol changes back to white.
a
The operation continues without the steam jet.