Bosch HSB737357Z, Instruction Manual

Page: 16 / 28

en
Time-setting options
16
Oven
Operating the oven
Switching on the oven
Note:
Always keep the appliance door closed when it is
in operation.
1.
Turn the function selector to the desired operating
mode.
2.
Turn the temperature selector to set the desired
temperature.
The oven switches on.
The indicator lamp is lit when the oven is heating up. It
goes out during pauses in heating.
Note:
The indicator lamp also lights up when the
function selector is in the off position and a temperature
is set. The oven only begins to heat up when an
operating mode is set.
Switching off the oven
1.
Turn the function selector to the
Û
position.
2.
Turn the temperature selector to the
Û
position.
The oven switches off.
O
Time-setting options
Time-sett ing optio ns
Setting the time
After the appliance has been connected to the mains
for the first time or after a power cut, three zeros flash in
the display.
1.
Press the
0
button.
2.
Set the current time with the "+" and "-" buttons.
After 7 seconds, the time setting is adopted.
Note:
To change the set time, press the "+" and "-"
buttons and set the current time with the "+" and "-"
buttons.
Setting the timer
The timer has no influence on the functions of the oven.
The duration of the timer can be set to between 1
minute and 23 hours and 59 minutes.
1.
Press the "
0
" button.
The
V
symbol flashes in the display panel and three
zeros are displayed.
2.
Set the required cooking time with the "+" and "-"
buttons.
A signal sounds once the time has elapsed.
Notes
■
To change the set cooking time, select the timer with
the
0
button and set the cooking time using the "+"
and "-" buttons.
■
To cancel the settings, select the timer with the
0
button and press the "+" and "-" buttons
simultaneously.
Switching off the acoustic signal
Press the "-" button to switch off the acoustic signal.
After seven minutes, the signal switches off
automatically.
Changing the audible signal
Three different audible signals are available.
1.
Press the "+" and "-" buttons simultaneously.
2.
Press the
0
button.
The current audible signal is shown in the display
panel, e.g. "Tone 1".
3.
Press the "-" button to select a different audible
signal.