30
Keep Warm function
This function is suitable for melting chocolate or butter
and for keeping food warm.
Activating
1.
Select the required power level.
2.
Within the next 10 seconds, touch the
Keep Warm
key.
The
–©
indicator lights up.
The function is activated.
Deactivating
1.
Select an element.
2.
Touch the
Keep Warm
key.
The
–©
display goes out. The element switches itself
off and the residual heat indicator appears.
The function is deactivated.
Panel Lock
You can use the panel lock to prevent
the
appliance
from
being
turn
ed
on
accidentally
.
Activating and deactivating the panel lock
The cooktop must be turned off.
To activate:
1.
Switch on the cooktop using the main switch.
2.
Touch the
Panel Lock
key for approx. 4 seconds.
The
D
indicator lights up for 10 seconds.
The cooktop is locked.
To deactivate:
1.
Switch on the cooktop using the main switch.
2.
Touch the
Panel Lock
key for approx. 4 seconds.
The lock is released.
Automatic panel lock
With this function, the panel lock is automatically
activated whenever you turn off the cooktop.
Turning on and off
See "Basic settings" section.
Wipe protection
Cleaning the control panel while the cooktop is on may
change the settings. In order to avoid this the cooktop
has a wipe protection function.
To activate: Touch the
Panel Lock
key. An acoustic
signal sounds. The control panel is locked for
35 seconds. You can now wipe over the surface of the
control panel without altering any settings.
To deactivate: The control panel will be unlocked once
35 seconds have elapsed. To release the function early,
touch the
Panel Lock
key.
Notes
▯
An audible signal sounds 30 seconds after activation.
This indicates that the function is about to finish.
▯
The wipe protection function does not lock the main
switch. The cooktop can be switched off at any time.
Automatic time limitation
If the element is used for prolonged periods of time
without changes in the settings being made, the
automatic time limitation function is triggered.
The element stops heating.
”‰
and the residual heat
indicator
•
/
œ
flash alternately in the display.
The indicator goes out when any symbol is pressed. The
element can now be reset.
When the automatic time limitation is activated depends
on the selected heat level (from 1 to 10 hours).
Basic settings
The appliance has various basic settings. You can adjust
these settings to the way you usually cook.
Display Function
™‚
Automatic panel lock
‹
Manual*.
‚
Automatic.
ƒ
Function deactivated.
™ƒ
Signal tones
‹
Confirmation and error signals are switched off.
‚
Only the error signal is switched on.
ƒ
Only the confirmation signal is switched on.
„
All signal tones are switched on.*
™„
Display energy consumption
‹
Switched off.*
‚
Switched on
* Factory settings