76
Cleaning agents
Damage to the various different surfaces caused by using the
wrong cleaning agent can be avoided by observing the following
instructions.
When cleaning the hob do not use
■
undiluted washing-up liquid or dishwasher detergent,
■
scouring pads,
■
abrasive cleaning agents such as oven cleaner or stain
remover,
■
high-pressure cleaners or steam jets.
■
Do not clean individual parts in the dishwasher.
When cleaning the oven do not use
■
sharp or abrasive cleaning agents,
■
cleaning agent with a high alcohol content,
■
scouring pads,
■
high-pressure cleaners or steam jets.
■
Do not clean individual parts in the dishwasher.
Wash new sponges thoroughly before first use.
Stainless steel fronts
Wipe the appliance with plenty of water and some washing-up liquid. Always wipe parallel to the natural grain.
Otherwise, you could scratch the surface. Dry with a soft cloth. Remove flecks of limescale, grease, starch and
albumin (e.g. egg white) immediately. Do not use any abrasive materials, scouring sponges or rough cleaning
cloths. The stainless steel fronts can be polished using a special care product. Follow the manufacturer's
instructions. You can purchase special stainless steel cleaner from our after-sales service or from specialist
retailers.
Enamel surfaces and
lacquered surfaces
Wipe with some washing-up liquid and a damp cloth. Dry with a soft cloth.
Burners and steel grid
of the gas burners
Do not clean in the dishwasher. Remove the wire rack and clean with a sponge, washing-up liquid and some hot
water. Remove the burner cup and cover. Clean with a sponge and some hot water and washing-up liquid.
Ensure that the gas outlets on the burner cups are clean and unobstructed. Brush the igniters with a small, soft
brush. The gas burners only work if the igniters are clean. Remove food residue from the burner shells with
some washing-up liquid and a damp cloth. Only use a little water. Water must not be allowed to enter the appli
-
ance. Ensure that the nozzle opening does not become blocked or damaged during cleaning. Dry all parts after
cleaning and place the burner cover accurately on the burner cup. If the parts are not positioned accurately, it
will be harder to ignite the burner. The burner covers are coated with black enamel. Due to the high tempera
-
tures, discolouration may occur. This will not impair the function of the burner. Replace the wire rack in the
oven.
Electric hob (option)
Clean with the hard side of a scouring sponge and some liquid scouring agent. After cleaning, switch the hob on
briefly to dry it. Wet hobs rust over time. Then apply a care product. Always remove spilt liquids and food resi
-
due immediately.
Metal ring of the
electric hob (option)
The metal ring may discolour with time. However, it is possible restore the original colour. Clean the ring with
the hard side of a scouring sponge and some liquid scouring agent. Do not touch the adjacent surfaces. This
could become damaged.
Knobs
Wipe with some washing-up liquid and a damp cloth. Dry with a soft cloth.
Glass panel
Can be cleaned with glass cleaner. Do not use any abrasive cleaning agents or sharp metal objects. These
could scratch and damage the surface of the glass panel.
Seal
Wipe with a damp cloth. Dry with a soft cloth.
Oven floor, ceiling and
side panels
Clean with hot water or vinegar solution. For heavy soiling: Only use oven cleaner on cold surfaces. Never apply
to the back panel.
Glass cover on the
oven light
Wipe with some washing-up liquid and a damp cloth. Dry with a soft cloth.
Accessories
Soak in hot soapy water. Clean with a brush or a sponge.
Aluminium baking tray
(option)
Do not clean in the dishwasher. Never use oven cleaner. To avoid scratches, never touch the metal surfaces
with a knife or similar sharp object. Clean horizontally with some washing-up liquid and a damp glass cleaning
cloth or a microfibre cloth. Dry with a soft cloth. Do not use any abrasive materials, scouring sponges or rough
cleaning cloths. They could scratch the baking tray
Childproof lock
(option)
If a childproof lock has been fitted on the oven door, it must be removed before cleaning. Soak all plastic parts
in hot soapy water and wash with a sponge. Dry with a soft cloth. If very dirty, the childproof lock will not work
properly.
Plinth drawer (option) Wipe with some washing-up liquid and a damp cloth. Dry with a soft cloth.
Accessories
Soak in hot soapy water. Clean with a brush or sponge.