40
| English
1 609 92A 3S7 | (24.2.17)
Bosch Power Tools
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions.
Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
Intended Use
The power tool is intended as a stationary machine for making
straight lengthways and crossways cuts in wood. Horizontal
mitre angles of –48° to +48° as well as vertical bevel angles
of –2° to +47° are possible.
The machine is designed with sufficient capacity for sawing
hard and softwood as well as press and particle board.
When operating as a table saw, the power tool is not permit-
ted for cutting aluminium or other non-ferrous metals or al-
loys.
The light of this power tool is intended to illuminate the power
tool’s direct area of working operation and is not suitable for
household room illumination.
Product Features
The numbering of the components shown refers to the repre-
sentation of the power tool on the graphic pages.
1
OFF button
2
ON button
3
Mounting holes
4
Recessed handles
5
Allen key (size 6 mm)/slotted screwdriver
6
Tilt-protector bar
7
Saw blade
8
Dust bag
9
Chip ejector
10
Locking screw of lever
11
11
Bracket
12
Hex socket screw for mounting of saw blade
13
Spindle lock
14
Clamping flange
15
Interior clamping flange
16
Laser lens cover
Chop and Mitre Saw Features
17
Release button of the tool arm
18
Handle
19
Laser unit/Laser radiation outlet
20
Retracting blade guard
21
Material clamp
22
Saw table of the chop and mitre saw
23
Scale for mitre angle
24
Insert plate
25
Locking knob for various mitre angles
26
Mitre detent lever
27
Detents for standard mitre angles
28
Mounting holes for material clamp
29
Saw-table extension
30
Fence
31
Adjustable fence
32
Stop screw for 33.9° bevel angle (vertical)
33
Stop bolt for 33.9° bevel angle (vertical)
34
Lighting unit
35
Light switch (“Light”)
36
Switch for marking of cutting line (“Laser”)
37
Bevel lock lever
38
Transport safety-lock
39
Hex socket screws (6 mm) of the fence
40
Laser warning label
41
Hex socket screws of the saw table extension
42
Threaded rod
43
Wing bolt
44
Locking screw of the adjustable fence
45
Locking bracket
46
Fine scale
47
Indicator for bevel angle
48
Scale for bevel angle
49
Screws for insert plate
50
Rubber cap (front)
51
Adjustment screw for laser position
(parallelism)
52
Adjustment screw for laser position (flush levelling)
53
Rubber cap (side)
54
Adjustment screw for laser position
(lateral deviation)
55
Screw for fine scale
56
Screw for bevel angle indicator
57
Allen screw (size 3 mm) for standard bevel angle 0° (ver-
tical)
58
Allen screw (size 3 mm) for standard bevel angle 45°
(vertical)
Table Saw Features
59
Saw table of the table saw
60
Riving knife
61
Parallel guide
62
Push stick
63
Blade guard
64
Clamping handle of the parallel guide
65
Scale for clearance of the saw blade to the parallel guide
66
Lower saw blade cover
67
Pins for attachment of the hold-down stick
68
Clamping lever
69
Clearance indicator
70
Screw for parallel guide clearance indicator
71
Guide of the parallel guide
72
Adjustment screw for tightening tension of guide
71
73
Screws inside the glide pad of the parallel guide
74
Set screws of the parallel guide
OBJ_BUCH-1688-007.book Page 40 Friday, February 24, 2017 12:15 PM
