8
| English
1 609 92A 1VR | (30.11.15)
Bosch Power Tools
Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power tool’s op-
eration. If damaged, have the power tool repaired before use.
Many accidents
are caused by poorly maintained power tools.
Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier to control.
Use the power tool, accessories and tool bits etc. in accordance with these in-
structions, taking into account the working conditions and the work to be per-
formed.
Use of the power tool for operations different from those intended could
result in a hazardous situation.
Battery tool use and care
Recharge only with the charger specified by the manufacturer.
A charger that
is suitable for one type of battery pack may create a risk of fire when used with an-
other battery pack.
Use power tools only with specifically designated battery packs.
Use of any
other battery packs may create a risk of injury and fire.
When battery pack is not in use, keep it away from other metal objects, like
paper clips, coins, keys, nails, screws or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals
together may cause burns or a fire.
Under abusive conditions, liquid may be ejected from the battery; avoid con-
tact. If contact accidentally occurs, flush with water. If liquid contacts eyes,
additionally seek medical help.
Liquid ejected from the battery may cause irrita-
tion or burns.
Service
Have your power tool serviced by a qualified repair person using only identi-
cal replacement parts.
This will ensure that the safety of the power tool is main-
tained.
Safety Warnings for Screwdrivers
Hold power tool by insulated gripping surfaces, when performing an opera-
tion where the fastener may contact hidden wiring.
Fasteners contacting a
“live” wire may make exposed metal parts of the power tool “live” and could give
the operator an electric shock.
Hold the machine with a firm grip.
High reaction torque can briefly occur while
driving in and loosening screws.
OBJ_BUCH-2023-003.book Page 8 Monday, November 30, 2015 2:45 PM
