English |
7
Bosch Power Tools
1 609 92A 3AN | (22.12.16)
Safety Warnings for Drills
Wear ear protectors when impact drilling.
Exposure to
noise can cause hearing loss.
Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory
may contact hidden wiring or its own cord.
Cutting ac-
cessory contacting a live wire may make exposed metal
parts of the power tool live and could give the operator an
electric shock.
Use appropriate detectors to determine if utility lines
are hidden in the work area or call the local utility com-
pany for assistance.
Contact with electric lines can lead
to fire and electric shock. Damaging a gas line can lead to
explosion. Penetrating a water line causes property dam-
age.
Switch off the power tool immediately when the tool
insert jams. Be prepared for high reaction torque that
can cause kickback.
The tool insert jams when:
– the power tool is subject to overload or
– it becomes wedged in the workpiece.
Secure the workpiece.
A workpiece clamped with clamp-
ing devices or in a vice is held more secure than by hand.
Keep your workplace clean.
Blends of materials are par-
ticularly dangerous. Dust from light alloys can burn or ex-
plode.
Always wait until the machine has come to a complete
stop before placing it down.
The tool insert can jam and
lead to loss of control over the power tool.
Never use the machine with a damaged cable. Do not
touch the damaged cable and pull the mains plug when
the cable is damaged while working.
Damaged cables in-
crease the risk of an electric shock.
Products sold in GB only:
Your product is fitted with a
BS 1363/A approved electric plug with internal fuse
(ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should
be cut off and an appropriate plug fitted in its place by an
authorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Products sold in AUS and NZ only:
Use a residual current
device (RCD) with a rated residual current of 30 mA or
less.
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions.
Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
Intended Use
The machine is intended for impact drilling in brick, concrete
and stone as well as for drilling in wood, metal and plastic. Ma-
chines with electronic control and right/left rotation are also
suitable for screwdriving and thread-cutting.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Key type drill chuck
2 Drilling/Impact Drilling selector switch
3 Lock-on button for On/Off switch
5 On/Off switch
5 Rotational direction switch
8 Handle (insulated gripping surface)
7 Chuck key
8 Screwdriver bit*
9 Universal bit holder*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
Impact Drill
GSB 500 RE
Professional
Article number
3 601 AA0 1..
Rated power input
W
500
Output power
W
250
No-load speed
min-1
0 – 2600
Impact frequency at no-load
min
-1
0 – 41600
Rated torque
Nm
1.5
Right/left rotation
Spindle collar dia.
mm
43
Max. drilling dia.
– Brickwork
– Concrete
– Steel
– Wood
mm
mm
mm
mm
10
10
8
20
Chuck clamping range
mm
1.5 – 10
Weight according to EPTA-
Procedure 01:2014
kg
1.5
Protection class
/
II
The values given are valid for a nominal voltage [U] of 230 V. For diffe-
rent voltages and models for specific countries, these values can vary.
Please observe the article number on the type plate of your machine.
The trade names of the individual machines may vary.
OBJ_BUCH-1230-002.book Page 7 Thursday, December 22, 2016 1:38 PM