English |
21
Bosch Power Tools
1 609 929 K67 | (21.8.07)
f
Use suitable detectors to determine if utili-
ty lines are hidden in the work area or call
the local utility company for assistance.
Contact with electric lines can lead to fire
and electric shock. Damaging a gas line can
lead to explosion. Penetrating a water line
causes property damage or may cause an
electric shock.
f
Do not operate the power tool stationary.
It
is not designed for operation with a saw table.
f
Do not use high speed steel (HSS) saw
blades.
Such saw blades can easily break.
f
When working with the machine, always
hold it firmly with both hands and provide
for a secure stance.
The power tool is guided
more secure with both hands.
f
Secure the workpiece.
A workpiece clamped
with clamping devices or in a vice is held
more secure than by hand.
f
Do not work materials containing asbestos.
Asbestos is considered carcinogenic.
f
Take protective measures when dust can
develop during working that is harmful to
one’s health, combustible or explosive.
Ex-
ample: Some dusts are regarded as carcino-
genic. Wear a dust mask and work with
dust/chip extraction when connectable.
f
Always wait until the machine has come to
a complete stop before placing it down.
The
tool insert can jam and lead to loss of control
over the power tool.
f
Never use the machine with a damaged ca-
ble. Do not touch the damaged cable and
pull the mains plug when the cable is dam-
aged while working.
Damaged cables in-
crease the risk of an electric shock.
Functional Description
Read all safety warnings and all in-
structions.
Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.
Intended Use
The power tool is intended for cutting wood
lengthways and crossways in straight lines and
at bevel angles of up to 45° on a firm surface.
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1
Blade guard
2
Lock-off button for On/Off switch
3
On/Off switch
4
Auxiliary handle
5
Spindle lock button
6
Scale for mitre angle
7
Wing bolt for bevel-angle preselection
8
Wing bolt for parallel guide
9
Cutting mark, 45°
10
Cutting mark, 0°
11
Parallel guide
12
Retracting blade guard
13
Lever for retracting blade guard
14
Base plate
15
Wing bolt for bevel-angle preselection
16
Sawdust ejector
17
Allen key
18
Clamping bolt with washer
19
Clamping flange
20
Saw blade*
21
Mounting flange
22
Saw spindle
23
Fastening screw for extraction adapter*
24
Extraction adapter*
25
Clamping lever for cutting-depth preselection
26
Cutting-depth scale
27
Set of screw clamps*
28
Guide rail*
29
Connection piece*
30
Vacuum hose*
31
Guide-rail adapter*
*The accessories illustrated or described are not in-
cluded as standard delivery.
OBJ_BUCH-293-003.book Page 21 Tuesday, August 21, 2007 3:45 PM
