8
| English
Intended use
The power tool is intended for making straight cuts in wood
with and against the grain and mitre cuts in wood while rest-
ing firmly against the workpiece.
Product features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1)
On/off switch
(2)
Lock-off function for on/off switch
(3)
Cover for utility hook
(4)
Spindle lock button
(5)
Auxiliary handle
(6)
Wing bolt for parallel guide
(7)
Clamping lever for cutting depth preselection
(8)
Scale for mitre/bevel angles
(9)
Clamping lever for mitre/bevel angle preselection
(10)
Worklight
(11)
45° cut mark
(12)
0° cut mark
(13)
Parallel guide
(14)
Retracting blade guard
(15)
Base plate
(16)
Adjusting lever for retracting blade guard
(17)
Protective guard
(18)
Chip ejector
(19)
Rechargeable battery
a)
(20)
Cutting depth scale
(21)
Rechargeable battery release button
a)
(22)
Saw spindle
(23)
Mounting flange
(24)
Circular saw blade
a)
(25)
Clamping flange
(26)
Clamping bolt with washer
(27)
Hex key
(28)
Dust/chip box
a)
(29)
Extraction hose
a)
(30)
Utility hook
a)
(31)
Handle (insulated gripping surface)
a)
Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical data
Hand-held circular saw
GKS 185-LI
Article number
3 601 FC1 2..
Rated voltage
V
18
No-load speed
A)
min
-1
5000
Hand-held circular saw
GKS 185-LI
Max. cutting depth
– at a 0° mitre/bevel angle
mm
57
– at a 45° mitre/bevel angle
mm
41
Spindle lock
●
Base plate dimensions
mm
134 x 280
Saw blade diameter
mm
165
Max. base blade thickness
mm
1.8
Min. base blade thickness
mm
0.9
Locating bore
mm
20
Weight according to
EPTA-Procedure 01:2014
B)
kg
3.2–4.3
Recommended ambient tem-
perature during charging
°C
0 to +35
Permitted ambient temperat-
ure during operation
C)
and
during storage
°C
–20 to +50
Recommended rechargeable
batteries
GBA 18V...
≥ 4.0 Ah
ProCORE18V...
≥ 4.0 Ah
Recommended chargers
GAL 18...
GAX 18...
GAL 36...
A) Measured at 20–25 °C with rechargeable battery
GBA 18V
5.0Ah
.
B) Depends on battery in use
C) Limited performance at temperatures < 0 °C
Rechargeable battery
Bosch
sells some cordless power tools without a re-
chargeable battery. You can tell whether a rechargeable bat-
tery is included with the power tool by looking at the pack-
aging.
Charging the battery
u
Use only the chargers listed in the technical data.
Only
these chargers are matched to the lithium-ion battery of
your power tool.
Note:
Lithium-ion rechargeable batteries are supplied par-
tially charged according to international transport regula-
tions. To ensure full rechargeable battery capacity, fully
charge the rechargeable battery before using your tool for
the first time.
Inserting the Battery
Push the charged battery into the battery holder until it
clicks into place.
Removing the Battery
To remove the rechargeable battery, press the battery re-
lease button and pull the battery out.
Do not use force to do
this.
1 609 92A 750 | (29.04.2022)
Bosch Power Tools
