English - 2
d)
Store idle power tools out of the reach of
children and do not allow persons unfamil-
iar with the power tool or these instruc-
tions to operate the power tool.
Power tools
are dangerous in the hands of untrained users.
e)
Maintain power tools. Check for misalign-
ment or binding of moving parts, break-
age of parts and any other condition that
may affect the power tool’s operation. If
damaged, have the power tool repaired
before use.
Many accidents are caused by
poorly maintained power tools.
f)
Keep cutting tools sharp and clean.
Prop-
erly maintained cutting tools with sharp cut-
ting edges are less likely to bind and are eas-
ier to control.
g)
Use the power tool, accessories, tool bits
etc. in accordance with these instruc-
tions, taking into account the working
conditions and the work to be performed.
Use of the power tool for operations different
from those intended could result in a hazard-
ous situation.
5) Battery tool use and care
a)
Recharge only with the charger specified by
the manufacturer.
A charger that is suitable for
one type of battery pack may create a risk of fire
when used with another battery pack.
b)
Use power tools only with specifically des-
ignated battery packs.
Use of any other bat-
tery packs may create a risk of injury and fire.
c)
When battery pack is not in use, keep it
away from other metal objects, like paper
clips, coins, keys, nails, screws or other
small metal objects, that can make a con-
nection from one terminal to another.
Shorting the battery terminals together may
cause burns or a fire.
d)
Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If
contact accidentally occurs, flush with
water. If liquid contacts eyes, additionally
seek medical help.
Liquid ejected from the
battery may cause irritation or burns.
6) Service
a)
Have your power tool serviced by a quali-
fied repair person using only identical re-
placement parts.
This will ensure that the
safety of the power tool is maintained.
Working safely with this machine
is possible only when the operat-
ing and safety information is read
completely and the instructions
contained therein are strictly fol-
lowed.
■
If you have long hair, wear a protective hairnet.
Work only with close-fitting clothes.
■
If the cable is damaged or cut through while
working, do not touch the cable and pull the
plug immediately. Never use the machine if the
cable is damaged.
■
Connect machines that are used in the open
via a residual current device (RCD) with an ac-
tuating current of 30 mA maximum. Do not op-
erate the machine in rain or moisture.
■
Always direct the cable to the rear away from
the machine.
■
Secure the workpiece.
A workpiece clamped
with clamping devices or in a vice is held more
secure than by hand.
■
Apply the machine to the workpiece only when
switched off.
■
Always switch the machine off and wait until it
has come to a standstill before placing it down.
■
Never allow children to use the machine.
■
Bosch can only guarantee a flawless function-
ing of the machine if the original accessories
intended for it are used.
The machine is intended to cut threads in through
holes and with the respective accessory in blind
holes.
For Your Safety
Intended Use
3 609 929 A82.book Seite 2 Mittwoch, 22. Februar 2006 8:40 08
5 • 3 609 929 A82 • TMS • 09.02.06
