Bosch FPC-500-2, Operation Manual

Page: 24 / 34

24 en | Operation Conventional Fire Panel
F.01U.172.982 | 5.0 | 2012.04 Operation Guide Bosch Sicherheitssysteme GmbH
When you disable the relays, a message confirming the
disablement appears on the LCD after exiting the menu.
Re-enabling relays
Go to the Disable Relays menu as described above. You are
prompted to confirm the re-enablement. Press the ACK key. The
relays are re-enabled.
Disabling/enabling All (zones, relays, notification appliances)
You can use the "Enable All" function if only one relay, one zone
or one notification appliance has been disabled.
4.2.3 Menu
In addition to the functions in level 1, the menu provides the
following options:
– 5-View Config
– 6-System Config
– 1-Date/Time
– 2-Keypad Tone
– 3-Language
- 1- A–L
- 2- M–Z
Press zone key 3.
You are prompted to confirm the disablement.
– Press the ACK key.
The relays are now disabled.
– Press the "Reset" key.
The relays are not disabled.
3
ACK RESET
Press the "Test" key and then zone key 3.
This takes you to the Dis/Enable submenu.
Press zone key 4.
This takes you to the All submenu.
Upon confirmation via the ACK key, all zones, relays and
notification appliances will be disabled/re-enabled.
3
4
ACK