Bosch FPC-500-2, Operation Manual

Page: 19 / 34

Conventional Fire Panel Operation | en 19
Bosch Sicherheitssysteme GmbH Operation Guide F.01U.172.982 | 5.0 | 2012.04
4.2.1 Actions
Switching between day and night mode
In day mode, delay times are activated in zones that are
programmed as alarm verification.
Performing a reset
Trigger evacuation, test alarm
Press the "Day/night mode" key.
The "Day mode" LED is illuminated in day mode and
deactivated in night mode. The LCD shows Normal in night
mode and Normal Day in day mode.
Press the "Reset" key.
– Press the ACK key.
The fire panel performs a reset if it is not in a normal
state.
– Press the "Reset" key.
No reset is performed.
RESET
ACK RESET
NOTICE!
Only trigger an evacuation if you want to trigger a test alarm.
You can only trigger a test alarm when the fire panel is in the
normal state.
NOTICE!
As standard, the EVAC button only activates the notification
appliances.
CAUTION!
If you have discovered a real fire, use a manual call point to
trigger the alarm.