Bosch FPA-1200 System Information Download Page 93

Page: 93 / 174

Modular fire panel

Installation | en

Bosch Sicherheitssysteme GmbH

System Information

07.2020 | 12.0 | F.01U.028.089

OPC
Server

Ethernet
100BaseTX

FPA-5000
FPA-1200

Figure 4.42:

MPC connection to BIS via OPC server

Installation

The MPC Panel Controller can be installed in the following housings: CPH 0006 A, MPH 0010
A, HCP 0006 A and HBC 0010 A.
For installation, follow the instructions on the following pages.
Notes:
–

Make sure the Panel Rail Short is installed before you install the panel controller.

–

Secure the grounding cable at the screw provided on the housing (4).

–

Plug the cable into the IN slot on the Panel Rail Short (6).

Caution

: Connection at the OUT slot or to a Panel Rail Long is not permissible.

–

Plug the terminal element for the data bus into the OUT slot on the last occupied panel
rail (8).

Summary of Contents for FPA-1200















































































































































































Search results

Summary of Contents for FPA-1200

Reviews:

Related manuals for FPA-1200

Brands by name

Popular brands

Bosch FPA-1200, System Information

Search results

Summary of Contents for FPA-1200

Reviews:

Related manuals for FPA-1200

Brands by name

Popular brands