Bosch FPA-1200, System Information

Page: 14 / 174

14 en | Product Description Modular fire panel
07.2020 | 12.0 | F.01U.028.089 System Information Bosch Sicherheitssysteme GmbH
!
Warning!
The power button must be used to switch off the device before removing the power supply. It
may not be disconnected from power supply while system is running. The device may be
damaged if this procedure is violated. Not following this procedure may result in loss of
warranty. Refer to user guide for further information.
Figure 2.3: Overview of panel controller
Pos. Designation Function
A Interfaces Panel networking and inputs for internal device monitoring
B Touchscreen Operating the networked system through virtual buttons and variable display
windows
C 6 fixed buttons Standard entries
D Power button Shutdown and restart of the device
E Memory card slot Memory card reader for maintenance services
F Ethernet ports Panel networking and interface to various systems
G 18 LEDs Indicating the operating status
Networking
A panel controller with premium license can be networked with up to 32 panel controllers,
remote keypads and OPC servers.
Panels and keypads display all messages, or you can form a group of panels and keypads.
Within one group, only messages of this group are displayed.
Alarm indication
All messages are shown on the display with a bright color. The displayed messages contain the
following information:
–
Message type
– Type of the triggering element
– Description of the exact location of the triggering element
– Logical zone and sub-address of the triggering element
At any time, the operator can request a status overview for each evacuation zone and each
output connected to the fire protection equipment.