Bosch FPA-1000 Series, Release Notes

Page: 11 / 20

Analog Addressable Fire Panels Release Notes for Version 1.11 | en 11
Bosch Security Systems, Inc. Release Notes F.01U.075.638 | 08 | 2012.08
– New SLC devices: The following SLC devices are supported:
– FAP-325-IM Miniature Response Contact Monitor
– FLM-325-I4-A Contact Monitor 4-inch Class A
– FLM-325-I4-AI Contact Monitor 4-inch Class A w/Isolator
– FLM-325-2R4-2A Dual Relay Module 2 A
– FLM-325-2R4-2AI Dual Relay Module 2 A w/Isolator
– FLM-325-2R4-8A Dual Relay Module 8 A
– FLM-325-2R4-8AI Dual Relay Module 8 A w/Isolator
– Phone line 2 trouble: In/out calls on phone line 2 no longer initiate line disconnect
trouble signals.
– Real-time event printing features including programmable delay : This feature, as
described in the IOG and Online Help, is now available on MMI and Web page.
5.3 Known Issues in Version 1.12
– Answer unknown trouble: When remote access is enabled, incoming calls (non-modem)
result in a trouble message. Currently, a “work around” is to disable remote access.
– New SLC devices: The FAP-325-T Analog Multisensor Detector is in the literature as SLC
device, but is not available yet.
6 Release Notes for Version 1.11
6.1 New Features in Version 1.11
No new features introduced in this version.
6.2 Issues Fixed in Version 1.11
– Phone line 1 troubles: In/out calls on phone line 1 no longer initiate line disconnect or
dialer answering trouble signals.
6.3 Known Issues in Version 1.11
– Remote dial-up connection: The remote dial-up connection for web-based programming
is not working.
7 Release Notes for Version 1.10
7.1 New Features in Version 1.10
– Support for new SLC devices:
–
FAP-325-V2F Analog Photoelectric Smoke Detector Flat
– FLM-325-NA4 Supervised Output Module (Class A and B)
– FLM-325-NAI4 Supervised Output Module (Class A and B, with Isolator)
– Expansion of the SLC protocol to be able to connect up to 254 devices and/or modules
to one SLC-loop (applies to new SLC devices)
– SLC device group types
– For the FPE-1000-SLC V1.25 or higher, the maximum SLC current is increased to allow
more devices being connected to one SLC
– FLM-325-B6S: Programming option for activation by host detector