Base Sounder Indoor,
uninterruptible
Installation Notes | en
7
Bosch Sicherheitssysteme GmbH
2015.11 | 3.0 | F.01U.216.916
1
Installation Notes
!
Caution!
The products should only be assembled out of direct sunlight,
as this is the only way to ensure correct functioning and a long
service life.
Notice!
Installation must only be carried out by authorized specialist
personnel.
If you operate the base sounder without an automatic detector
or a strobe, you must bridge contacts b1 and b2. Only if the
sounders are installed with a detector or strobe, they comply
with EN54-3. Only if the sounder volume is set to the maximum
level, the certified sounds (no. 1, 8, 10, 24) comply with
EN54-3. Certified sound measurements are listed in the
document Bulletin_Sound_Pressure_Level_EN54-3.pdf
(F.01U.263.413), which can be obtained from the manufacturer.
Notice!
Batteries must not be disposed of in household waste. Please
take used batteries to the local collection points. See
www.boschsecurity.com/standards for further information.
2
Technical data
Sound pressure level at a distance of 1 m in dB(A)
<93.1
Frequency (Hz)
440 to 2900
Operating voltage (V DC)
15 to 33
Current consumption in standby (mA)
<1
Current consumption in alarm (mA)
<3.85
Battery type
3 V Lithium
Battery capacity (Ah)
2.6
