16
en | Installation
FLEXIDOME IP panoramic 6000/7000 - outdoor
2019-07 | V01 | DOC
Installation manual
Bosch Security Systems B.V.
8.
Push the grommet into the hole of the camera base, with both thumbs in opposite sides.
Make sure that the grommet is fully pushed.
9.
Adjust the length of the PoE cable, as necessary.
10. If necessary, do a loop with the PoE cable on the hooks of the mounting plate.
11. Align the camera base with the mounting plate. If the device is mounted on a wall, make
sure that the arrow on the camera base points in the same direction as the arrow on the
mounting plate.
12. Push the camera base against the mounting plate and turn the camera base clockwise
until a click is heard. Make sure that the camera base is secured.
