FLEXIDOME indoor 5100i (IR) | FLEXIDOME
outdoor 5100i (IR)
Configuration | en
35
Bosch Security Systems B.V.
User manual
11-2022 | V02 | F.01U.394.427
Recording media
Select a media tab to connect to the available storage media.
iSCSI Media
To use an
iSCSI system
as the storage medium, a connection to the desired iSCSI system is
required to set the configuration parameters.
The storage system selected must be available on the network and completely set up. It must
have an IP address and be divided into logical drives (LUNs).
1.
Enter the IP address of the required iSCSI destination in the
iSCSI IP address
field.
2.
If the iSCSI destination is password protected, enter the password into the
Password
field.
3.
Click
Read
.
–
The connection to the IP address is established.
The
Storage overview
field displays the logical drives.
Local Media
A microSD card inserted in the camera can be used for local recording.
4
If the microSD card is password protected, enter the password into the
Password
field.
The
Storage overview
field shows the local media.
Note
: microSD card recording performance is highly dependent on the speed (class) and
performance of the microSD card. It is recommended to use an Industrial microSD card.
Local storage
To activate the ANR settings,
Recording 1
must be assigned to an iSCSI target and
Recording
2
to a local storage.
This function enables recording to the iSCSI target. If there is a network disconnection, the
video is recorded to the local storage. When the network is recovered, the video recorded to
the local storage is transferred to the iSCSI target and completes the missing information.
Activating and configuring storage media
Available media or iSCSI drives must be transferred to the
Managed storage media
list,
activated, and configured for storage.
Note:
An iSCSI target storage device can only be associated with one user. If a target is being used
by another user, ensure that the current user no longer needs the target before decoupling
that user.
1.
In the
Storage overview
section, double-click a storage medium, an iSCSI LUN or one of
the other available drives.
–
The medium is added as a target in the
Managed storage media
list.
–
Newly added media is shown as
Not active
in the
Status
column.
2.
Click
Set
to activate all media in the
Managed storage media
list.
–
The
Status
column shows all media as
Online
.
3.
Check the box in the
Rec. 1
or
Rec. 2
column to specify the recording tracks to be
recorded on the target selected.
Deactivating storage media
A storage medium in the
Managed storage media
list can be deactivated. It is then no longer
used for recordings.
1.
Click a storage medium in the
Managed storage media
list to select it.
2.
Click
Remove
below the list. The storage medium is deactivated and removed from the
list.
