Bosch FCS-320-TM, Operation Manual

Page: 4 / 100

4 en | Table of Contents FCS-320-TM Aspirating Smoke Detector
F.01U.130.928 | 1.0 | 2009.11 Operation Guide Bosch Sicherheitssysteme GmbH
3.7.4 Double U-pipe system 46
3.8 Simplified Pipe Planning 47
3.8.1 I-Pipe System - Simplified Planning 47
3.8.2 U-Pipe System - Simplified Planning 48
3.8.3 M-pipe system - simplified planning 48
3.8.4 Double U-Pipe System - Simplified Planning 49
3.9 Planning for Forced Airflow 50
3.10 Power Supply 53
4 Installing the Aspirating Smoke Detector 55
4.1 General 55
4.2 Installing the Unit 55
4.3 Connection to the Fire Panel 59
4.3.1 Electrical Connection 59
4.4 Installation and electrical connection of auxiliary modules 60
4.4.1 Installing the reset board 60
4.4.2 Connection to fire panel with reset board 61
4.4.3 Installation of the relay board 61
4.4.4 Connecting the relay board 62
4.5 Settings via the FAS-ASD-DIAG Diagnostic Software 62
4.5.1 Setting the Response Sensitivity 62
4.5.2 Delay Time of the Alarm Triggering 63
4.5.3 Activation threshold of the airflow monitoring 63
4.5.4 Delay time for an airflow malfunction 63
4.5.5 Fault Indication 63
4.5.6 Dynamic airflow 63
4.5.7 ROOM·IDENT 63
4.5.8 LOGIC·SENS 64
4.5.9 Setting the Fan Voltage 64
4.5.10 Entering the current air pressure 64
4.5.11 Entering the height above sea level 64
4.6 Data Logging 64
5 Installation of the Pipe System 66
5.1 Length Change of the Pipe System 67
5.2 Air sampling openings 68
5.3 Ceiling Lead-through Adapter 70
5.4 Monitoring with Forced Airflow 71
5.4.1 Detection at Intake and Exhaust Openings 71
5.4.2 Detection in the Bypass 71
5.5 Air filter 72
5.5.1 Installing the Air Filter Box 72
5.6 Air-return Pipe 72
5.7 Three-way tap 73
5.8 water separator 74
5.9 Test Adapter 75
6 Commissioning 76
6.1 Preparation 76