DIVAR IP all-in-one 7000 3U
Installing a SATA hard drive | en
25
Bosch Security Systems B.V.
Installation manual
2021.10 | V02 | DOC
6.2
Installing a hard drive into a hard drive carrier
To install a hard drive into a hard drive carrier:
1.
Remove the screws which secure the dummy drive to the hard drive carrier.
2.
Remove the dummy drive from the hard drive carrier and place the hard drive carrier on a
flat surface.
3.
Slide a new hard drive into the hard drive carrier with the printed circuit board side
facing down.
4.
Align the mounting holes in both, the hard drive carrier and the hard drive.
5.
Secure the hard drive to the hard drive carrier with the six screws.
1
Hard drive carrier
2
SATA hard drive
