36
en | Maintenance
DIVAR IP all-in-one 7000 (2U)
2019.08 | V1 | DOC
Installation manual
Bosch Security Systems B.V.
9.4.1
Removing a hard drive carrier from a hard drive bay
To remove a hard drive carrier from a hard drive bay:
1.
Press the release button to the right of the hard drive carrier. This extends the hard drive
carrier handle.
2.
Use the handle to pull the hard drive carrier out of the chassis.
1
Release button
2
Hard drive carrier handle
Notice!
Except for short periods of time (swapping hard drives), do not operate the unit with the
hard drives removed from the bays.
9.4.2
Installing a hard drive into a hard drive carrier
To install a hard drive into a hard drive carrier:
1.
Remove the screws which secure the dummy drive to the hard drive carrier.
2.
Remove the dummy drive from the hard drive carrier and place the hard drive carrier on a
flat surface.
