background image

DIVAR IP all-in-one 7000 (2U)

Safety | en

11

Bosch Security Systems B.V.

Installation manual

2019.08 | V1 | DOC

harmful interference with radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference, in which case you will be required to correct the
interference at your own expense.

1.8

Data security precautions

For data security reasons observe the following:

Physical access to the system shall be restricted to authorized personnel only. It is
strongly suggested to place the system in an access control protected area, in order to
avoid physical manipulation of the system.

Windows online update functionality or the corresponding monthly roll-up patches for
offline installation can be used to install OS security updates.

Limiting local network access to trusted devices is strongly suggested. Details are
described in the Technical note 

Network Authentication 802.1X

 and in the 

Bosch IP Video

and Data Security Guidebook

, available in the online product catalog.

For access via public networks only use the secure (encrypted) communication channels

.

See also

Remote connection to the system, page 30

Summary of Contents for DIP-7280-00N





















































Reviews: