30
en | Maintenance
DIVAR IP all-in-one 5000
2019.08 | V1 | DOC
Bosch Security Systems B.V.
1.
On the BVMS default screen, press CTRL+ALT+DEL.
2.
Hold SHIFT, click
Switch User
and keep SHIFT pressed for
about five seconds.
3.
Enter user name and password.
4.
On the Desktop, in the
Tools
folder, right-click the
Enable_SuperDoctor_5_Service
script, and then click
Run
as administrator
.
5.
Double-click the
SuperDoctor 5 Web
icon in the same
folder.
6.
Log on to the web interface using the following default
credentials:
User Name: ADMIN
Password: ADMIN
7.
Click the
Configuration
tab, and then click
Password
Settings
and change the default password.
8.
Click the
Configuration
tab, and then click
Alert
Configuration
.
9.
Activate the
SNMP Trap
feature and specify the IP address
of the receiver for SNMP traps.
6.2
Recovering the unit
Following procedure describes how to restore the factory
default image.
To restore the unit to factory default image:
1.
Start the unit and press
F7
during the BIOS power-on-self-
test.
The Recovery menu is displayed.
2.
Select one of the following:
–
Initial factory setup:
restores to factory default image
and deletes all data on the HDDs.
or
–
System Recovery (back to Factory Defaults):
restores
to factory default image; data on the HDDs will not be
deleted.