Bosch DINION 5000 IP Installation Manual Download Page 79

Page: 79 / 118

DINION capture 5000 IP

Advanced Mode | en

Bosch Security Systems, Inc.

Installation Manual

| 1.0 | 2012.01

8.5.1

Storage Management

Device manager

If the

VRM

option is activated, the VRM Video Recording

Manager manages all recording and no further settings can be

configured here.

Note:

Activating or deactivating VRM causes the current settings to be

lost; they can only be restored through reconfiguration.

Recording media

Select the required recording media to activate them and then

configure the recording parameters.

iSCSI Media

If an

iSCSI system

is selected as the storage medium, a

connection to the desired iSCSI system is needed to set the

configuration parameters.

The storage system selected must be available on the network

and completely set up. Amongst other things, it must have an IP

address and be divided into logical drives (LUN).

Enter the IP address of the required iSCSI destination in

the

iSCSI IP address

field.

If the iSCSI destination is password protected, enter this

into the

Password

field.

Click the

Read

button. The connection to the IP address is

established. The

Storage overview

field displays the

logical drives.

Local Media

The supported local recording media is displayed in the storage

overview field.

Activating and Configuring Storage Media

The storage overview displays the available storage media.

Select individual media or iSCSI drives and transfer these to the

Managed storage media

list. Activate the storage media in this

list and configure them for storage.

Summary of Contents for DINION 5000 IP























































































































Search results

Summary of Contents for DINION 5000 IP

Reviews:

Related manuals for DINION 5000 IP

Brands by name

Popular brands

Bosch DINION 5000 IP, Installation Manual

Search results

Summary of Contents for DINION 5000 IP

Reviews:

Related manuals for DINION 5000 IP

Brands by name

Popular brands