10
Important information
Installation Instructions:
Additional information concerning gas
cookers:
When installing gas hotplates, comply with
the relevant national statutory
regulations (e.g. in Germany: Technische
Regeln Gasinstallation TRGI).
Always comply with the currently valid
regulations and installation instructions
supplied by the gas appliance
manufacturer.
Only one side of the extractor hood may be
installed next to a high-sided unit or high
wall. Gap at least 2”.
Minimum distance on gas hotplates
between the upper edge of the trivet
and lower edge of the extractor hood:
30”,
Fig. 1.
Old appliances are not worthless
rubbish. Valuable raw materials can be
reclaimed by recycling old appliances.
Before disposing of your old appliance,
render it unusable.
You received your new appliance in a pro-
tective shipping carton. All packaging
materials are environmentally friendly and
recyclable. Please contribute to a better
environment by disposing of packaging
materials in an environmentally-friendly
manner.
Please ask your dealer or inquire at your
local authority about current means of
disposal.
The extractor hood can only be used in
exhaust air mode.
Always mount the extractor hood over the
centre of the hob.
Minimum distance between electric hob
and bottom edge of extractor hood:
30”,
Fig. 1.
The extractor hood must not be
installed over a solid fuel cooker – a
potential fire hazard (e.g. flying sparks) –
unless the cooker features a
closed,
non-removable cover
and all national
regulations are observed.
The smaller the gap between the extractor
hood and hotplates, the greater the like-
lihood that droplets will form on the under-
side of the extractor hood.
Summary of Contents for DIE 165 R
Page 2: ...2 en page 03 16 fr pages 17 30 es página 31 44 Abb 1 ELECTRO Fig 1 GAZ ...
Page 45: ...45 Notes ...
Page 46: ...46 Notes ...
Page 47: ...47 Noticias ...
