DCNM-MMDSP Anti-reflection foil
The DICENTIS anti‑reflection foil can be used to protect the tempered glass screen of a
DICENTIS multimedia Device.
Installation procedure
1.
Use the included alcohol swab and the microfiber fabric to clean the device LCD screen
before installation.
2.
Peel the positioning adhesive release paper from the rear of anti‑reflection foil.
3.
Position the anti‑reflection foil on the device LCD screen, and then fix the positioning
adhesive to the side of the device.
4.
Open the anti‑reflection foil, and use the “cleaning stick” to clean surface dust from the
LCD screen.
5.
Peel the protective film from the other side of the anti‑reflection foil.
6.
Lightly press the anti‑reflection foil on to the LCD screen. If air bubbles are trapped under
the anti‑reflection foil, use the “squeegee” to remove them.
DCNM-NCH Name Card Holder
The name card holder (1) can be used to permanently display the participant’s name on the
rear of a DICENTIS multimedia Device. The name card holder has two magnets (2) that allow it
to be easily attached to, and removed from, the rear of the device.
1
2
2
Figure 7.7: DCNM‑NCH assembly
Item
Description
1
Name card holder.
2
Magnets.
Notice!
A paper insert template is included on the DVD that can be downloaded at: https://
licensing.boschsecurity.com/software
7.3
7.4
40
en | Mechanical installation of Contribution Devices
DICENTIS
2016.09 | V1.4 |
Hardware Installation Manual
Bosch Security Systems B.V.
Summary of Contents for DICENTIS
Page 1: ...DICENTIS Conference System en Hardware Installation Manual ...
Page 2: ......
Page 43: ......
