manualshive.com logo in svg

Bosch DICENTIS, Hardware Installation Manual

Share
Download
Bosch DICENTIS Hardware Installation Manual Download Page 35

DCNM-D / DCNM-DVT / DCNM-DSL / DCNM-DE
 

Figure 7.2: Front, top, rear and side views

Item

Description

1

Two‑way loudspeaker.

2

Near Field Communication (NFC) reader.

3

Chairperson priority button, microphone mute button, or microphone request
button for second participant.

4

Microphone request button.

5

Voting buttons.

6

Language selection buttons.

7

Language display.

8

4.3” capacitive touch screen.

9

3.5 mm stereo jack for headphone or headset with integrated microphone.

10

Headphone volume control.

11

Microphone input connector.

12

Cable guides.

–

DCNM-DE, DCNM-DVT and DCNM-DSL are compliant with the Radio Equipment Directive
(RED) 2014/53/EU.

–

Operating frequency is 13.56 MHz. Maximum field strength is -8.4 dBµA/m @ 10m.

 

DICENTIS

Mechanical installation of Contribution Devices | en

35

Bosch Security Systems B.V.

Hardware Installation Manual

2016.09 | V1.4 |

Summary of Contents for DICENTIS













































Reviews:

No comments

Brands by name

Popular brands

Load more brands