Installation material and tools
This section describes installation material such as cables, connectors and tools.
Recommedations
–
Always use manufacturer specified installation products, materials and tools.
–
In general, use different cable ducts for the system network cables, audio cables and
mains supply cables.
–
In public areas where people can touch or move above the connectors and cables, use
metal protection covers.
!
Warning!
Do not exceed the bend limitations of system network cables (DCNM‑CBxxx):
The minimum bend radius of the system network cable is 50 mm radius.
System Network Cable
The system network cables, terminated with connectors on both ends, are available in
different lengths and are used to connect DICENTIS devices to each other. The cable consists
of four CAT‑5e twisted pairs to transmit data and two copper wires to supply the power.
Ordering number
Cable lengths
m
ft
DCNM-CB02
2
6.56
DCNM-CB05
5
16.40
DCNM-CB10
10
32.81
DCNM-CB25
25
82.02
Table 5.1: Cable types and lengths
Figure 5.1: DCNM-CBxx cable and connector view
5
5.1
26
en | Installation material and tools
DICENTIS
2016.09 | V1.4 |
Hardware Installation Manual
Bosch Security Systems B.V.
Summary of Contents for DICENTIS
Page 1: ...DICENTIS Conference System en Hardware Installation Manual ...
Page 2: ......
Page 43: ......
