Installation | en
7
Bosch Security Systens, Inc.
UL Installation Guide
2016.07 | 04 | F.01U.291.483
Notice!
Electromagnetic interference (EMI) can cause problems on long wire runs.
Figure 2.1: Enclosure Mounting
Callout - Description
1 - Point chart label
2 - Mounting skirt hooks (2)
3 - Module mounting holes (12)
4 - Tamper switch mounting holes (5)
5 - Skirt mounting hole (1)
6 - Enclosure mounting holes (5)
7 - Mounting skirt hook holes (2)
8 - Back of the control panel
9 - Lock down tab
2.4
Installing the Control Panel
1.
Place the control panel over the inside back of the enclosure, aligning the large
rectangular openings of the mounting skirt with the mounting hooks of the enclosure.
Slide the control panel down so that it hangs on the hooks. Refer to Figure 2.1.
2.
Remove the tape from the #6 x 1/4-in. screw in the mounting tab on the control panel.
The screw passes through the mounting tab and into the skirt mounting hole in the
enclosure. Tighten the screw to secure the control panel in the enclosure.
3.
Connect earth ground to the control panel before making any other connections. Refer to
Connecting Earth Ground.
Summary of Contents for D7412GV4
Page 1: ...D9412GV4 D7412GV4 v2 03 en UL Installation Guide ...
Page 2: ......
Page 38: ......
Page 39: ......
