D1265
|
Owner's Manual | Part I: Security System Basics
12
Bosch Security Systems, Inc. | 9/10 | F01U169130-02
Burglary Alarms
Burglary alarms are the second priority. When a
burglary point activates while your system is armed,
your keypad emits a steady high-pitched burglary tone.
The tone sounds for the time set by your security
company.
The keypad display shows the number of burglary
points activated, the message
Enter Passcode to
silence alarm
and then custom text for each activated
point.
If there is more than one point causing an alarm, the
display shows each point for 3 sec before showing the
next one. When the last alarm is shown, the next
display is the first alarm.
Silencing Burglary Alarms
Entering a personal passcode with the proper authority
level silences a burglary alarm and disarms the system
if it was armed.
The system now shows
*Alarm Silenced*
and then
the number of points in alarm (
### ALARMS
) and
the custom text of all the points in alarm, in ascending
numeric order by area.
Entering
CMD 4
clears the scrolling point text from
the display.
The
*Alarm Silenced*
message continues to alternate
with idle text as a reminder that it is still possible to
view the text of the points in alarm by using the View
Alarm Memory function (refer to View Alarm Memory
(CMD + 4 + 0) on page 23 for more information).
To clear the event memory and remove the
*Alarm
Silenced*
message from the display, press the
Clear
Display
button.
The display shows the instructions for clearing the
message. Enter a valid passcode and press the
Clear
button.
Fire Trouble and Fire Supervisory Events
When a fire trouble or fire supervisory condition
occurs, your keypad emits three warble tones, then a
pause (repeatedly).
The system shows the number of fire points that are in
a trouble or supervisory condition as well as the point
text of the affected points.
Silencing Fire Trouble and Fire Supervisory
conditions
Pressing
CMD 4
or the
Silence
button silences and
clears the Fire Trouble and/or the Fire Supervisory
conditions.
In addition to this, entering a personal passcode with
the proper authority level silences a fire trouble and
disarms the control panel if it was armed. Use
CMD
40
if you wish to review these cleared troubles.
Some systems might be programmed to
automatically re-sound the keypad’s
trouble tone after a period of time if the
fire trouble or fire supervisory condition
remains. Consult your security company
for further information.
Special Fire Trouble and Fire Supervisory Display
If you silence the keypad or clear a trouble or
supervisory condition for a Fire Point from the display
and the fire point remains faulted,
Fire Trouble
appears in the keypad’s display.
The Fire Trouble display persists until the detector
causing it is restored to normal.
Viewing Fire Trouble and Fire Supervisory
Conditions
After pressing
CMD 4
or the
Silence
button, Fire
Trouble continues to automatically scroll through the
display. To view the faulted fire points, press any
numeric key, then press
Next
to scroll these displays
manually. Events scroll from oldest to newest.
