31 / 40
ctrlX CORE
Battery change
Bosch Rexroth AG
R911405645, Edition 03
The customer may not repair the device. Exceptions are maintenance works listed in the
chapter “Maintenance”.
For further information in the event of repair, please contact the Bosch Rexroth Service.
14
Maintenance
14.1 General maintenance information
NOTICE
Maintenance work in the device is only permitted by trained staff!
If hardware or software components have to be exchanged, please contact
the Bosch Rexroth Service or ensure that only skilled staff changes the
respective components.
14.2 Scheduled maintenance tasks
Include the following tasks into the maintenance schedule:
•
Check all plug and terminal connections of the components for proper tightness and possible
damage at least once a year
•
Ensure that cables are not broken or crushed
•
Replace damaged parts immediately
14.3 Battery change
WARNING
Risk of injury due to fire or explosions caused by batteries. Risk of chemical
burns due to battery contact.
−
Note that the batteries and accumulators are not short-circuited.
−
Do not charge batteries and accumulators externally. Do not dismantle,
destroy or burn them or do not heat them above 80 °C.
−
Recycle old batteries and accumulators immediately and as intended.
−
Use only the battery specified in this documentation.
It is recommended to change the battery of the control ctrlX CORE every three years.
The battery holder GB01 is located on the bottom side of the control. Insert a common CR1025 lithium
battery into a drawer of this battery holder. The design of the battery drawer ensures that inserting the
battery is reverse polarity-protected. In order not to loose the time when changing the battery, a capac-
itor buffers the time for approximately 60 minutes.
Battery name: Lithium battery 3.0 V CR1025 (32 mAH), manufacturer: Renata, part number:
CR1025.IB.
Maint
enance
