background image

Conettix ITS-D6686-UL | Installation Guide | 3.0 Configuring and Programming the D6686 

 

Bosch Security Systems, Inc. | 10/12 | F01U274796-02

 

9.

 

Click on the Save XML As button to save 

the changes made and enter a name for 
these configuration settings. 

10.

 

Click on the Upload XML button to send 

these changes to the D6686. The device 
will save the changes and reboot with the 

new configuration. 

11.

 

Disconnect the Ethernet cable connecting 

the PC and the D66868 and connect the 
D6686 to the network switch or router as 

required. 

 

The D6686 is a Lantronix EDS-2100 

with custom firmware installed and 
UL Listed for use on the D6600. If 

standard Lantronix firmware is 
installed on a D6686, the device will 

no longer function on a D6600. 

 

 

If encryption is enabled on the 

D6686, you must enable it on all 
field devices (B420, DX4020-G, 

B5512, etc) with the same key. 
Encryption must also be enabled in 

the D6600 Receiver. Refer to the 

D6600 Program Entry Guide

 (P/N: 

4998122702).  

 

 

The network interface module 
(DX4020, C900V2, C900TTL-E, or 

D9133TTL-E) must have the proper 
software version to support 

encryption. For more details, refer 
to the 

Device Installer Operation and 

Installation Guide

 (P/N: 

4998138688). 

 

3.5

 

Programming Overview for the 

D6600 

The D6600 Receiver is shipped with factory 
default program parameters and features already 

installed. Descriptions of the program items are 
found in the 

D6600 Program Entry Guide

 (P/N: 

4998122702). Many of the operational features of 
the D6600 can be altered through programming 

options. The programming options you choose 
depend on: 

 

The type(s) of peripheral reporting device(s) 
used in your central station (for example 
external printer or automation computer) 

 

The supervision characteristics for these 
devices 

 

The type of communicators reporting to the 
receiver 

 

The number and type of receiving lines in use 

 

Sending the files back to the D6600 

(CPU/Host/Network, Account Database, or 
Line Card) 

 

Upgrading the Software installed in the 
D6600 (CPU, System, or PSTN line cards) 

Refer to the 

D6200 Software Operation and 

Installation Guide 

(P/N: 4998154991) for 

information and procedures on how to 
accomplish these tasks. 

Summary of Contents for Conettix ITS-D6686-UL













Reviews: