Conettix ITS-D6686-UL | Installation Guide | 4.0 Specifications
.
Bosch Security Systems, Inc. | 10/12 | F01U274796-02
9
4.0
Specifications
Table 2: Specifications
Supported
Protocols
ARP, UDP/IP, TCP/IP, Telnet, ICMP, SNMP, DHCP, BOOTP, TFTP, and FTP
Connectors
Serial:
2 - DB9M DTE serial ports
Network:
1 - RJ45 10Base-T/100Base-TX Ethernet port
Cables
Ethernet:
CAT5 or better unshielded twisted pair
Max Length: 6 m (20 ft) and installed in same enclosure/rack as
D6600.
RS-232:
Max Length: 6 m (20 ft) and installed in same enclosure/rack as
D6600.
Data Rates
Serial speed ranging from 300 bps to 115.2 kbps (D6600 supports 38400 bps)
Serial Line Formats
Characters
7 or 8 data bits
Stop bits:
1 or 2
Parity:
Odd, even, none
Modem Controls
DTR, DSR
Flow Control
Software: XON/XOFF
Hardware: CTS/RTS
Management
FTP
SNMP (read only)
Serial login
Telnet login
System Software
Flash ROM standard: downloadable from a TCP/IP host (TFTP), FTP, or over serial port
Diagnostic LEDs
Power
10/100 Mb Link on RJ45, 10/100 Activity on RJ45
RX Serial 1 Activity, TX Serial 1 Activity, RX Serial 2 Activity, TX Serial 2 Activity
Compatibility
Ethernet: v2.0/IEEE 802.3
D6600
AC Current
Required
UPS Standby Current: 0.4 A
Power Input
Transformer: Group West, Part Number 48D-12-900.
AC nominal operating range: 120 VAC, 60 Hz, 0.15A max
Standby Power
An uninterrupted power supply (UPS) is required for use with the D6686, when used
for UL Fire (UL1481) Protective Signaling Systems. A 60 hr. minimum UPS standby
power supply is required for UL Certification.
Environmental
Operating
Temperature:
0° to 50° C (32° to 122° F)
Storage Temperature:
-40° to 85° C (-40° to 185° F)
Dimensions (H x W x D):
Unit:
3.75 in. x 2.9 in. x .9 in. (9.5 cm x 7.3 cm x 2.3 mm)
Weight
0.6 lbs. (0.26 kg)
